16
Appliance's parts
1. Spout
2. Power base
3. Top lid
4. Lid release button
5. Handle
6. Water level indicator
7. On/off switch with indicator light
THE APPLIANCE’S CONSTRUCTION AND FEATURES
OPERATION, CLEANING AND MAINTENANCE
Before use for the first time:
Before first use, remove possible manufacturing process residues by boiling 3 full kettles of water.
Dispose this water.
Tip: You can use vinegar or special descaling agents for the first time.
Use:
1. Turn the jug so that the spout faces away from you.
2. Push the button backward to open the lid (4).
3. Fill the jug with the required quantity of water (at least 0.5 liters, and a maximum of 1.7 liters). Never
fill the water boiler over the “max”. Otherwise the hot water can spatter out of the base.
ATTENTION:
Make sure that you do not spill any water on the base.
4. Release the button to open the lid.
5. Place the jug on the base, and insert the plug in the wall socket. Push down the on/off switch. The on/
off pilot light will illuminate.
6. The jug kettle is now switched on, and the water will now begin to heat. The jug kettle switches off au
-
tomatically a few seconds after the water has come to the boil. The on/off pilot light will now extinguish.
7. Remove the jug from the base by the handle, and pour the water out.
ATTENTION:
Be carefully you do not contact the hot water. It can cause serious burning wounds
8. When you wish to heat the water without it coming to the boil you can switch off the jug kettle at any
time you require.
9. Remove the plug from the wall socket when you have finished using the jug kettle.
Overheating safeguard:
The jug kettle is fitted with an overheating safeguard. This will switch off the jug kettle if it is operated
without (sufficient) water. Allow the jug kettle to cool down for at least 10 minutes before using it again.
2
4
5
7
1
3
6
Summary of Contents for KF 3038
Page 1: ...KF 3038 KF 3039 PL INSTRUKCJA OBSŁUGI 4 EN OPERATING INSTRUCTIONS 10 ...
Page 18: ...18 ...
Page 19: ...19 ...
