19
OPERATION
You can stop frothing by pressing any button once.
Do not remove the lid during appliance operation. Wait until the frothing wand stops completely
before you open the lid. Otherwise, the appliance will not operate properly and may be dam
-
aged.
Allow the appliance to cool for 5 minutes after each cycle, otherwise, the overheating protection
will activate (after five continuous cycles). When overheating protection activates the power
indicator will flash red and the appliance will not operate. After about 5-10 minutes overheating
protection will deactivate and you can continue to use the appliance.
l
The power indicator turns off when the appliance is not used for about 15 minutes.
l
Always unplug the appliance when you don’t use it.
l
Do not leave the appliance unattended until completely cool.
Heat milk
l
Place the base on a level and stable surface
l
Fill the pitcher with a sufficient amount of milk
The maximum quantity of milk, which can be heated is about 200ml. There is a scale with maxi
-
mum capacities for the relevant functions to help you measure the milk.
l
Place the lid with the frothing coil on the pitcher (no frothing wand attached).
l
Place the pitcher on its base.
l
Connect the plug to a power outlet, the power indicator lights blue.
l
Press the HEAT button once, the colour of the power indicator turns red and the appliance will turn
on. The milk will be heated until it reaches the temperature of 65°C (+/– 10°C). When the mixing unit
stops rotating, the power indicator will turn back to blue.
l
The appliance will stop automatically after 150 seconds.
l
Open the lid — your heated milk is ready.
Mixing unit does not froth milk, but it prevents the milk from sticking to the heating element and
pitcher walls.
Do not remove the lid during appliance operation. Wait until the frothing wand stops completely
before you open the lid. Otherwise, the appliance will not operate properly and may be dam
-
aged.
Allow the appliance to cool for 5 minutes after each cycle, otherwise, the overheating protection
will activate (after five continuous cycles). When overheating protection activates the power
indicator will flash red and the appliance will not operate. After about 5-10 minutes overheating
protection will deactivate and you can continue to use the appliance.
l
The power indicator turns off when the appliance is not used for about 15 minutes.
l
Always unplug the appliance when you don’t use it.
l
Do not leave the appliance unattended until completely cool.
Froth milk (do not heat)
l
Follow the first 6 steps from the “
Heat and froth milk
” section.
l
Press the FROTH button twice (within 2 seconds), the colour of the power indicator will flash in blue
and the appliance will turn on. Frothing wand will rotate, but there will be no heating. The appliance
will complete frothing after about 1.5 minutes. The power indicator will be blue.
l
Open the lid — your frothed milk is ready.
Use full-fat milk with 3.2% fat content for frothing.
Frothed milk increases its volume. The maximum quantity of milk, which can be frothed is about
100 ml. There is a scale with maximum capacities for the relevant functions to help you meas
-
ure the milk.
EN