20
adjust the Duration to 2.00 - 2.30 - 3.00
hours. Press or wait 20 s to start pyro-
lytic cleaning.
The Pyrolytic cleaning programme comes
with special requirements.
First, the door status is checked: When the
oven door is open, the
indicator flashes
and the appliance waits 10 minutes until the
oven door is closed and if it is not, the pyro-
lytic programme is cancelled.
When the door is closed the indicator is
on and the door is locked. The indicator
is displayed and pyrolytic cleaning starts for
2.00 – 2.30 – 3.00 hours, depending on the
Duration you have set.
The appliance displays duration time left un-
til pyrolytic cleaning completes.
One hour before pyrolytic cleaning com-
pletes, the heaters are disconnected, the
temperature
--- C
is displayed and the appli-
ance stars cooling down.
The door is unlocked when temperature is
less than 150°C. The
indicator is off when
the door is unlocked. The pyrolytic cleaning
programme ends, but you cannot continue
cooking.
No settings can be changed during the py-
rolytic cleaning and you cannot continue
cooking with these settings, however you
can view current settings and temperature.
When you silence the alarm, the appliance
always enters standby mode.
NOTE:
The oven door is equipped with a lock, which
prevents it from being opened during the
cleaning process. Do not open the door so as
not to interrupt the cleaning process.
If there is a short power outage during py-
rolytic cleaning the appliance starts cooling
down and eventually unlocks the door.
If you interrupt the pyrolytic cleaning by turn-
ing the function selector knob to another po-
sition (such as 0), the appliance starts cool-
ing down and eventually unlocks the door.
When the door is unlocked the appliance
switches to standby.
If during pyrolytic cleaning you open the
door before it is locked, there will be an
[open door] beep and pyrolytic cleaning is
aborted.
Before starting the pyrolytic cleaning, please
see "Cleaning and Maintenance."
Error Codes
If any error is detected, the programme is
interrupted and the error code is shown on
the display:
E1 - temperature sensor failure, do not use
the appliance
E2 - no temperature sensor, do not use the
appliance
E3 - appliance overheated, do not use the
appliance until it has cooled down.
E4 - meat probe error - if the error disap-
pears when you unplug the meat probe, you
can use the oven with functions that do not
require a meat probe
E5 - oven cavity temperature exceeding
320°C for functions other than pyrolytic
cleaning, do not use the appliance
Prob - meat probe plugged in incorrectly
or meat probe plugged in during pyrolytic
cleaning.
OPERATION
Summary of Contents for EBP 946 101 E
Page 68: ......
