Amica AWT714S, Operating Instructions Manual

Page: 23 / 44

23
The user can select an appropriate wash programme according to the degree of
soiling, the type and amount of the laundry in order to ensure a better and more
efficient result. Once the programme has started, the parameters of the selected
wash programme can no longer be changed by setting the programme button in a
different position.
1
Programme selector dial
When the washing machine is in operation, the display shows the time remain-
ing until the end of the wash programme. The display also shows the following
symbols: Locking of the door of the washing machine and activated Child
Lock function .
The indicated time is an estimated value and can differ from the actual washing
duration depending on the temperature, the water pressure, the load, the amount
of detergent etc. The time is automatically updated during the washing cycle,
intermittent freezing and time leaps are possible.
When the Time delay function is selected, the display shows the time remaining
until the start of the programme.
When setting the spin speed, the display shows the following values:
0 (no spin) - 400 - 600 - 800 - 1000 - 1200 - 1400.
When setting the temperature, the display shows the following values:
- -°C (cold) - 20°C - 30°C - 40°C - 60°C - 90°C.
2
Display
Switch the washing on/off and abort the wash programme.
3
Standby button
Use the
4
Start/Pause button to start or interrupt the wash programme.
When the washing machine is in operation, the symbols “ “ on the display blink.
In the pause mode, the symbols “ “ do not blink but are lit continuously.
The pause function can be used to soak the laundry.
After starting the selected programme, wait about 10 minutes and then push the
Start/Pause
button. After the laundry has soaked for the required time, again
push the Start/Pause button and the washing machine will continue the wash
programme.
Soaking improves the washing results when the laundry is very soiled.
4
Start/Pause button
This button serves to delay the start of the wash programme. The delay can be
set from 0 to 24 hours.
Note!
In case of a power outage during the countdown of the delay time, the func-
tion will resume the countdown as soon as the power supply is restored.
Start delay button
5