7
INSTALLATION OF THE WASHING MACHINE
The drain hose is located at the back of
the washing machine. Secure the drain
hose so that it does not move during the
operation of the washing machine ! Do
not insert the drain hose into the water
pipe too deeply !
max 100 cm
min 60 cm
III. Connecting the water supply
IV. Water outflow
V. Mains supply connection
A supply hose with seals is inside the drum of the machine.
Water pressure min 0.1 MPa (1 bar), max 0.8 MPa (8 bar).
Supply the machine with cold water Important points:
l
after connecting, make sure the hose is not twisted
l
after connecting the hose and the valve, check they are sealed tight
l
regularly check the condition of the supply hose.
Use the new hoses sup-
plied with the machine.
Do not re-use hoses.
l
Connection of the washing machine to the mains (plug-in soc-
ket in the electrical installation) should be at a conspicuous and
accessible place!
l
Connect the washing machine only to the correctly installed
and earthed socket
l
Do not use an extension cord
l
Broken power leads, may be replaced only by authorised se-
rvicemen
l
Type of the power lead – H05VVF – 3G1.5
l
Catalogue number of the power lead: 8017546
