6
INSTALLATION OF THE WASHING MACHINE
I. Removing the transport protection (keep the blocking bolts for future use, e.g.
when moving house).
l
Unscrew the blocking bolts with a spanner.
l
Remove the rubber and plastic transport
brackets from the sockets along with the
washers and bolts.
The safety devices MUST be removed before the washing machine is used!
l
Stop up the holes with the stoppers
included in the bag of accessories.
-Do not place the washing machine on a carpet!
-The floor surface should not be either concave or sloping!
-Attention should be paid to the shape of the surface of the floor, so that the
entire weight of the appliance rests on its legs (not its body)!
II. Positioning and levelling the machine
l
Place the washing machine on a solid, even surface.
l
Loosen the nuts (1) with a spanner.
l
Screw the nuts (1) back in with a spanner.
l
Level the machine by adjusting the legs (2).
After positioning and levelling the machine,
check that it is stable by pressing down each
corner and ensuring it does not move!
