Amica AWN912DJB, Instruction Manual

Page: 12 / 28

12
DESCRIPTION OF CONTROL PANEL
2. Programme selector knob
Choose the appropriate wash programme as required, depending on how dirty the clothes
are, and type and amount of laundry loaded, which ensures better results and more effecti-
ve washing. Once the wash programme is started, turning the programme selector knob to
another position (except ) does not change the previously selected programme.
3. Start/Pause button
Press Start/Pause to start or pause a programme.
The remaining time is displayed and two dots are flashing the during wash cycle.
When you Pause a programme the remaining time is flashing and the dots are displayed
continuously.
The Pause mode can be used to soak the laundry.
Once the selected programme started wait for about 10 minutes and then press the Start/
Pause button. When the laundry is soaked as required, press the Start/Pause button aga-
in to resume the program. Soaking will improve washing results for heavily soiled laundry.
You can Pause a programme to add laundry to the drum during the wash cycle. o add
laundry to the drum during the wash cycle press the Start/Pause button. After a while, the
animated door symbol on the display will indicate that the door can be opened once the
door lock is released. When you see the symbol you can open the door and add laun-
dry. After adding laundry close the door and press the Start/Pause button. The appliance
will resume a wash programme.
Note: If symbol is shown and time is flashing when you press the Start/Pause button,
the laundry cannot be added at this stage of the programme.
4. Temperature button
This button allows the washing temperature to be set. Press this button to display water
temperature settings available for a given programme or an option for washing in cold
water (no heating). Depending on the programme selected, the display shows the following
temperature ° C (cold water) 30°C - 40°C - 50°C - 60°C - 70°C - 80°C - 90°C - 95°C.
5. Spin speed button
Press this button to set the spin speed when water is being pumped out of the washing
machine. Press the button to change the setting. Depending on the programme selected,
the display shows the following values: - - (no spin) - - (rinse hold) - 400 - 600 - 800 -
1000 - 1200.
Note: If you activate rinse hold function, the washing machine holds laundry in water when
programme has ended. Press Start/Pause button to drain water from the drum without
spin-drying cycle.