8
The drain hose is at the back of the
machine. Fix the drain hose so that it
does not move while the machine is
in operation (use the elbow as shown
below). Do not place the hose too deep
into the outlet pipe!
max 100 cm
min 60 cm
III. Connecting the water supply
IV. Water drain
V. Connecting the electric power supply
A water supply hose with seals is inside the drum of the machine.
l
Only plug the machine into a properly installed socket
with an earth pin!
l
Do not connect to an adaptor or an extension cord!
l
In the event of the power lead being damaged, it must be
replaced by an authorised technician.
l
The electrical system to which the appliance is to be
connected must be protected with a 10 A fuse.
INSTALLING THE MACHINE
Water pressure min. 0,1 MPa (1 bar), max.1 MPa (10 bar). Supply the machine
with cold water
l
after connecting, make sure the hose is not twisted
l
after connecting the hose and the valve, check they are sealed tight
l
regularly check the condition of the supply hose.
Use the new hoses sup-
plied with the machine.
Do not re-use old hoses.
l
The appliance’s mains connection (electrical wall socket)
should be in a visible and accessible place!
