11
2.
Display
l
Time, temperature, spin speed, delay start 1-23 h are available on display.
In addition, additional function indicators are displayed (delay start and
rapid wash), and START/PAUSE. Message End is displayed at the end of
programme.
l
The remaining time is displayed during wash cycle. The displayed time is an
estimate and may differ from actual wash cycle time, depending on temperature,
water pressure, load size, quantity of washing powder used etc. The time is
automatically updated during wash cycle. Displaying the same time for an
extended period or abrupt changes are normal.
l
Child Lock
When Child Lock is active if you attempt to change the wash cycle or settings
the
CL
symbol will flash on the display.
3. Temperature selector
button
This button allows the washing temperature to be set. Press this button to display water
temperature settings available for a given programme or an option for washing in cold
water (no heating). Depending on the programme selected, the display shows the follo-
wing temperatures - - °C (cold water) - - 30°C - 40°C - 50°C - 60°C -70°C - 80°C - 90°C.
For the Eco programme you can select the cold water option or 20°C on the display.
4. Spin speed
button
Press this button to set the spin speed when water is being pumped out of the washing
machine. Press the button to change the setting. Depending on the programme selec-
ted, the display shows the following options - - (spin off) - 400 - 600 - 800 – 1000
- 1200 - 1400.
5. Delay Start
button
Press this button to set the delay time for starting washing. The setting range available is
from 1-23 hours. Press the button to set the time after which washing is to commence.
NOTE:
If there is a power outage during Delay Time, countdown will resume
immediately after the power is restored.
DESCRIPTION OF CONTROL PANEL
1.
Programme selector knob
Choose the appropriate wash programme as required, depending on the degree of soil,
and type and amount of laundry loaded, which ensures better results and more effective
washing. Once the wash programme is started, turning the programme selector knob to
another position (except ) does not change the previously selected programme.
