15
USING THE APPLIANCE
II. Delay start setting
The delayed start function may be used when, for example, taking advantage of dis-
counted energy tariffs.
Procedure:
1. Close the door.
2. Set the programme selector knob to the desired programme (see the table further on).
3. Select additional functions or wash cycle parameters as required.
4. Press the Delay button.
5. Select time ranging from 1 to 23 hours. The display will show the setting from 1h to
23h.
6. Press the [Start/ Pause] button. The appliance will be set in delay mode.
Programme will commence automatically after the delay time has elapsed.
III. End programme
1. When the programme has ended
End
will flash on the display.
2. Turn off the water valve
3. Set the programme selection knob to .
4. Unplug the appliance from the mains.
5. Open the door and remove laundry.
IV. Cancelling and changing programme
Set the programme selector knob to position for several seconds to terminate a pro-
gramme. Then select the desired programme.
NOTE:
When you cancel a programme when there is water in the drum and turn the
programme selector knob to a different position, the appliance will drain the water. Then
select the desired programme.
I. Select Programme
1. Set the programme selector knob to the desired programme (see the table further
on).
2. In order to adapt the programme to your individual needs, you can set the tempera-
ture, spin speed, set the drying level, drying time or set a delayed start.
3. Press the [Start/ Pause] button