Amica APM 3011, Operating Instructions Manual

Page: 18 / 20

18
PROBLEM SOLVING
Please confirm the following contents before the entrusted maintenance:
Problems encountered Reason Troubleshooting
The air quality indicator
keeps red during
continuous operation.
Maybe the room area
exceeds the purification
capacity of the machine;
The filter components may
not have been installed.
Please keep the purifier running continu­
ously;
Please install the filter components
correctly.
The purifier can’t run. The power cord may not
be plugged in, or the
power cord may not be in
good contact;
The power switch may not
have been turned on.
Please plug in the power and make good
contact;
Please turn on the power switch.
The effect of removing
smoke and odor is poor.
Maybe the filter compo­
nents are not installed;
Maybe the filter compo­
nents have expired;
Maybe the air inlet is bloc­
ked by foreign objects.
Please install the filter components
correctly;
Please replace the new filter assembly;
Please remove the foreign matter from the
air inlet.
The air quality indicator
does not change.
It may be that the sensitivi­
ty of the sensor is unstable
for a period of time after
the start of operation. If
it doesn’t change after
turning green, the air may
be in a clean state;
It may be placed in a loca­
tion where dirt monitoring
is difficult, or the sensor
is dirty;
The strong indoor odor
may cause the sensor
sensitivity to decrease.
Please wait, after a few minutes of opera­
tion, the sensor will stabilize;
Blow the cigarette to the sensor. If the
indicator color changes, it is normal;
Please move the purifier or clean the
sensor;
Please adjust the fan speed to high grade
and run for several hours to 1 day.
Filter cleaning light does
not go out;
It may be that after
cleaning the filter com­
ponents, the „negative
ion” button was not long
pressed for 3 seconds.
After cleaning the filter components,
long press the „negative ion” button for 3
seconds.
Odor and smoke are
difficult to remove.
It may be that the filter
assembly is still wrapped
in the package.
Please remove the packing bag outside
the filter components.
If the following conditions occur, please send for repair:
1. The operation is not normal or not running, it is invalid to deal with according to the above method;
2. Foreign matter or water enters, and the operation is not normal.