83
1. Select a level surface to ensure sufficient space for the inlet and outlet ventila
-
tion openings.
The required distance between the oven outer surfaces and adjacent walls (or
appliances) is presented on the above figure. Do not remove the legs located in
the bottom of the appliance.
Blocking the inlet and outlet openings may damage the microwave oven. Place
the oven as far away from radio and television as possible. Operating microwave
oven may cause interference to radio and television reception.
2. Insert the oven power plug into a standard household wall socket. Make sure
beforehand whether voltage and frequency are the same as on the oven’s rating
plate.
WARNING
: Do not install the oven on the gas hob or other heat producing
appliance. In the event of such installation, the oven may be damaged and
void the warranty.
INSTALLATION INSTRUCTIONS
-
Remove all packaging materials and components.
-
Check the oven for damage such as dents or door misalignment
or breakage.
-
Remove any protective film from the surface of the cabinet.
-
Do not install the oven if it is damaged.
Do not remove the light brown mica cover bolted into the recess in
order to shield the microwave magnetron.
Installing
Accessible surfaces
may become hot during
oven operation.
5cm
10cm
20cm
5cm
