![background image](http://html1.mh-extra.com/html/amica/akman/akman_operating-instructions-manual_2932824020.webp)
20
Appliance components (Fig. 1, item ...)
1. Brush
2. Metal extension tube
3. Dust container
4. Hose connection
5. Narrow brush
6. Dust container release button
7. Rear wheel
8. Rear wheel rubber
9. Speed control knob
10. Switch button
11. Cord rewind device button
12. Hose
13. Handle with control buttons
DESCRIPTION OF THE APPLIANCE
Before using the appliance for the first time
(Fig. 2, item ...)
Always unplug the appliance before attaching or
removing attachments!
l
First install the batteries in the battery compart
-
ment of the control handle. Before using this
product, please install the batteries in the battery
compartment of the control handle. Carefully
open the battery cover as shown in Fig. 14,
insert two AAA 1.5V batteries into the battery
compartment of the control handle as shown in
Fig. 15.
Close the battery compartment cover as shown
in Fig. 16. Then press any control button and
now the appliance can be controlled remotely
from the handle.
Note:
When inserting batteries observe correct
polarity of battery “+” and “-” terminals. If the
vacuum cleaner is not used for a long time, re
-
move the batteries from the battery compartment
of the control handle.
l
Control speed using the handle: The remote
control handle has three buttons for operating the
vacuum cleaner. Use the “+” and “–” buttons to
adjust the suction power of the vacuum cleaner
(Fig. 17, Fig. 18). Use the button on the control
handle (fig. 19) to turn off the appliance
Note:
The remote control handle will only work
if the power button on the appliance is pressed.
Note:
No indicator on the remote control handle
lights up when you press any button. For battery
replacement, see chapter “Before using for the
first time.”
l
Fig. 22 shows how to connect the hose to the
vacuum cleaner:
Insert the hose coupling into the inlet opening
on the front of the vacuum cleaner.
Fig. 23 shows how to connect the hose handle
and metal extension tube:
l
Hold the flexible hose coupler and insert it into
the larger opening in the tube.
Fig. 24 shows how to connect the extension tube
and brush:
l
Insert the metal tube into the brush opening and
turn it to fix.
Fig. 25 shows how to check the winding of the
power cord.
l
You can pull the power cord out of the appliance
until the yellow mark appears. Make sure the
cord is not pulled out beyond the red mark. When
you have finished vacuuming, first turn off the
power, pull the plug out of the mains socket, then
press the winding button until the power cord is
completely withdrawn inside the appliance.
l
Figure 26 shows the location of the power button.
l
Insert the plug into the socket, press the power
button to be able to control the operation of the
appliance.
l
Fig. 27 shows the suction power adjustment
buttons.
l
Use the symbols on the suction power display
as a guide. Press the plus button (increases the
suction power) or the minus button (reduces the
suction power).
Fabric curtains (lowest setting)
Upholstery (sofa, high-end carpets and rugs)
Hard floors (highest setting)
Plain carpets
OPERATION
Summary of Contents for Akman
