manualshive.com logo in svg

Amica AGH7100, Installation, Use And Maintenance Manual

Share
Download
Amica AGH7100 Installation, Use And Maintenance Manual Download Page 2

2

Contents:

  3     Important safety warnings
  4     Important safety warnings and appliance information
  6     Using Your Hob
  7 

Hob layout(s)

  9     Igniting the burners
  10  Efficient use of your hob
  11     Care And Maintenance- AGH7100
  12  Care And Maintenance- AGVH7300
 13  Troubleshooting 
  14     What to do if you smell gas
  17  Preventing unsafe conditions
  18     Mains Electricity Connection
  19  Gas Supply Requirements
 20  Ventilation
  21  Natural Gas to LPG Conversion
  22  LPG to Natural Gas Conversion
  22  Fitting the hob
  24  How to install the hob
  25  Installation diagrams
  26  Energy efficiency information

IMPORTANT: THIS APPLIANCE MUST BE INSTALLED BY GAS 
SAFE REGISTERED PERSONS, IN COMPLIANCE WITH THE 
CURRENT REGULATIONS AND ONLY INSTALLED IN ROOMS 
EQUIPPED WITH ADEQUATE VENTILATION. CONSULT THIS 
ENTIRE MANUAL BEFORE PROCEEDING WITH INSTALLATION 
OR USE OF THE APPLIANCE. DO NOT MODIFY THE HOB IN ANY 
WAY. TO DO SO MAY BE DANGEROUS.

Summary of Contents for AGH7100





























Reviews:

No comments

Brands by name

Popular brands

Load more brands