29
OPERATION
Power Management
This function allows you to limit the total maximum power of your induction hob to one of the
following values: 2,8kW, 3,7kW, 6,0kW, 7,4kW (maximum power).
You need to specify the total maximum power of your induction hob within 5 minutes
of connecting the induction hob to the mains. To specify the total maximum power of
your induction hob, touch (1) to power on the hob and then touch and hold (5) (front
left zone) and (6) for 3 seconds.
The twin display will show the previous setting or — if there was no previous setting — the
default setting of 7.4 kW shown as “7.4” Use (
2
) and (
4
) to select the desired setting: 2.8 ;
3.7 ; 6.0 ; 7.4. Within 10 seconds of selecting the desired setting, touch and hold (
6
) for 3
seconds to confirm.
You will hear a beep and the selected maximum power setting will flash 3 times on the
display and then the appliance will turn off. Now your operating induction hob will not
exceed the total maximum power you selected.
If you do not confirm the selected maximum power setting, your induction hob will
turn off and operate with the previously selected maximum power or with the default
power of 7.4 kW.
When you select heat setting on individual cooking zones, the Power Management circuit will
ensure that the selected total maximum power is not exceeded. Any setting that would cause
the total maximum power to be exceeded will be unavailable to the user.
The Power Management circuit may disable a cooking zone if using it would cause the total
maximum power of the appliance to be exceeded.
Summary of Contents for 56783
Page 47: ...47 ...
