17
OPERATION
COOK TIME changes to END TIME in box
2. Entered cook time, for example 0:30,
changes to the actual end time, while the
remaining time is displayed on the red bar
below the actual end time .
symbol is displayed continuously. Once
cook time has elapsed, an acoustic signal
is sounded (2 beeps / pause / 2 beeps). The
sequence is repeated every 3 seconds for
about a minute,
symbol is flashing.
Touch to acknowledge and mute the
acoustic signal. After this, the appliance
switches to standby mode.
Setting Cook Time and End Time (for a
heating function)
for details on how to set Cook Time,
please refer to the preceding paragraph.
Setting End Time.
When is displayed continuously, touch
sensor field again. While
symbol continues
to be displayed,
,symbols starts flashing
and End Time is shown on the display.
If no change in setting is made within 5 sec-
onds, the appliance will return to previous
settings of cook time and the selected heating
function. Touch
navigation sensor fields
to set cook time in 1 minute steps.
Cook time is stored after 5 seconds or after
touching
sensor field.
COOK TIME changes to START TIME in box
2. Entered cook time changes to the actual
start time, while the time remaining to start
time is displayed on the red bar below the
actual start time , symbol is displayed con-
tinuously, while symbol is extinguished.If
no changes are made within 60 seconds, the
appliance enters standby mode. When any
sensor field is touched, the appliance is acti
-
vated and the display shows last settings.
Appliance operation in selected mode
When the current time is reaches start time,
the appliance will start the selected heating
function. START TIME changes to END TIME
in box 2. The display shows end time and the
time remaining to end time is displayed on
the red bar below the actual end time. When
cook time countdown begins the , symbol
is extinguished and symbol illuminates.