AMIC A9280-A-000 User Guide
Read Block Data
Each RFID tag has user accessible memory blocks. Typically each memory block
contains 4 bytes of data for tags complying with ISO-15693 standard. Please refer
to RFID tag manufacturer’s data sheet for details. AMIC’s A9280-A-000 CF reader
will read 4 bytes of data per block from RFID tags at a time. Please follow the
steps below for Read Block Data.
1. Single click on the
Block No.
box, and input the desired memory block number
to be read by the reader (default value is 0). The range of the block number
available for user access depends on the tag itself. Please refer to RFID tag
manufacturer’s data sheet for details.
2. Hold the PDA such that the distance between the tag and the CF reader is no
longer than 7 cm.
3. Single click on
Read Data
button to read the specified tag’s memory block.
4. The
Operation OK / Fail Display
box on the lower right hand corner should
turn green
5. The data read from the tag should be displayed in the Response Information
box
If ErrCode=02 is displayed in the Response Information box, the CF reader did not
read the tag memory correctly. Please follow steps 1 through 3 again.
Figure – 8
© AMIC Dec. 2004 – All rights reserved
p
11 of 20
Rev
1.0
