Amibot Spirit ICE, User Manual

Page: 9 / 96

14 15
Operating the appliance Operating the appliance
EN EN
Inserting the H2O tank
Starting the appliance
Figure 1
After attaching the dust bin or H2O tank, switch the robot on. Press
the AUTO button on the robot or the CLEAN button on the remote
control. The robot starts its cleaning cycle.
With the schedule feature, the robot can start a cleaning cycle at the
time you choose every day of the week. The time and scheduled time
can be reset at any time via the remote control.
Scheduling
Setting the time
The vacuum mode stops when the cleaning mode is selected; the
vacuum stops when the robot detects the water tank.
Clip it to the back of the robot. The robot automatically detects the
water tank thanks to its tank sensor. The robot is ready to start its
cleaning cycle.
NOTES:
•
Do not use the H2O tank to clean rugs or carpets.
• The water tank must be removed from the robot before it is charged.
• The dust remaining on the floor is picked up in the part of the tank intended for
the purpose as the central brush rotates.
• To allow vacuum mode to work, please refer to Vacuum Mode (page 12).
NOTES:
•
When the robot leaves the home base, it beeps 5 times. The AUTO button
indicator light is steady green.
• If the robot is on standby, press the AUTO button on the robot or the CLEAN
button on the remote control to start a cleaning cycle.
Figure 2
Figure 3
• The robot's cycle can be interrupted and it can be manually controlled using
the remote control. When you reactivate automatic cleaning, the robot starts
a new path.