Amibot Pulse, User Manual

Page: 10 / 112

8
Product Components
Display Panel
LED Panel
1. LED Panel
LED panel shows the time setting, charging status and error codes by using
numbers, letters or graphs.
Buttons
2. UV light button
In standby mode, press this button to preset the UV light status (ON/OFF) when
­€­‚ƒ„‚ ‚„ƒ†‡ˆ ‰Š‰‹Œƒ‚Žˆƒ‘’ƒ‡Š‹Ž‚ƒ“Š‡‡ƒ‚” ‰ƒ­‰•­–ƒ „ƒ— ˆ„ˆ‚˜
3. Schedule button
Press this button to enter/quit scheduling mode.
4. Clean button
a. Press this button on change from sleeping mode to standby mode.
b. In standby mode, keep pressing this button for more than 3 seconds to go into
sleep mode.
†˜ƒ¢­‰£ ¤ƒ„†Žˆ¥”‡ˆƒ„ˆ‚‚Š‰‹ƒŠ‰ƒ„†Žˆ¥”‡Š‰‹ƒ¤­¥ˆ˜
d. Start cleaning in standby mode.
5. Auto charging / Number increment button
a. Press this button to increase number in scheduling mode.
b. In other mode, press this button to start auto charging and charging mode.
6. Spot cleaning / Number decrement button
a. Press this button to decrease number in scheduling mode.
b. In other mode, press this button to start spot cleaning.
3
1