Amibot flex Laser, User Manual

Page: 26 / 210

24
Maintenance
Compartments and filters
You should empty the dustbin every time the robot completes a
cleaning cycle. Remove the robot’s dustbin from the top and empty
it by opening the cover located on the underneath. Then check that
there is no dirt obstructing the robot’s vacuum system.
Dustbin
Filters
Open the dustbin to access the filters and clean them.
1. The HEPA filter cannot be cleaned, otherwise it would become
damaged. To extend the filter's life, gently shake it outside
to remove any small dust particles that may have gathered.
If the HEPA filter is damaged, it is advisable to replace it
to keep up the efficiency of the robot's filter. (Figure 1)
2. Carefully shake the prefilter to remove any dust particles and
clean it with clean water. Let it completely dry before putting it
back in the dustbin. (Figure 2)
1 2
EN