Amibot Everybot Swip AS50, User Manual

Page: 20 / 130

18
Troubleshooting
EN
02
The robot does not
move correctly
1. The floor is too wet.
2. The water tanks
are not attached
correctly.
3. The cleaning pads
are too damp.
4. The floor is on a
slope of more than
10%.
5. The gap and
obstacle sensors
are dirty.
1. Dry the floor.
2. Remove and reinsert
the water tanks.
3. Remove and wring
out the cleaning pads
before reattaching
them to the water
tanks.
4. Place the robot on a
flat surface that is no
more than 10%.
5. Clean the sensors
using a soft cloth.
03
The appliance
has lost cleaning
efficiency.
1. The cleaning pads
are dirty.
2. The water tanks are
empty.
3. The robot battery is
weak.
1. Replace the cleaning
pads.
2. Refill the water tanks
with clean water
and your usual floor
cleaner.
3. Charge the robot.
04
The remote
control does not
work.
1. The batteries
are not inserted
or need to be
replaced.
2. The remote control
is broken.
1. Change the batteries.
2. Replace the remote
control with a new
one.
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.