SAF 3000
07.2019
Page 14 of 25
Cleaning the coarse screen:
1. Close the filter inlet valve.
2. Release pressure from the filter by performing a flush cycle.
3. Remove the filter lid (16), pull out the flushing chamber (14) with its seal (15).
4. Pull out the coarse screen (13) and clean it.
5. Insert the coarse screen (13) in its position, so that it rests on its supports.
6. Insert the flushing chamber (14), Make sure the seal is on top of the chamber centering ring with its opening facing the inside of
the filter housing. The insertion should be done at a slight angle and in a circular motion.
7. Close and tighten the filter lid.