FILTER TYPE 2" AAF
000616
-
10101
9
/
07.2017
Page
16
of
28
Preparations:
•
Disconnect the system from the water supply and drain it via its 3/4" ball valve, live the valve open.
•
Perform a general inspection of the system
.
1.
Re-Check that the system is not
under pressure!
2.
Carefully release
the clamp and
remove the lid. (Figure.1)
3.
Unscrew the butterfly-nut on the
filtration element. (Figure.2)
4.
Remove the tightening cylinder.
(Figure.3)
5.
Remove the discs (for convenience
we recommend using a plastic
bag) (Figure 4, 5)
6.
Tie each set on a string and place
them in a cleaning solutions (refer
to 'Cleaning Recommendations' in
this Document)
7.
Thoroughly wash the discs with
fresh water and then reassemble
each set of discs on its spine
(Figure 6).
8.
Check that the correct quantities
of discs are assembled on the
spine (Figure.7)
9.
Put on the tightening cylinder and
tighten the butterfly-nut. (Figure
8, 9)
10.
Reassemble the filter lid and
tighten the clamp. (Figure 10, 11)
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 4
Figure 5
Figure 6
Figure 1
Figure2
Figure 3
