AMI NGX MINI 2, Installation & Owner'S Manual, Page: 11 / 48

NGX Mini 2 Jukebox 9 22022623 Rev B
8. The front door is secured using slide hinges,
which do not require tools to attach. To attach
the front door, carefully lift the door, line up the
hinge pins on the cabinet with the mating hinge
barrels on the front door, and lower the door
(see
Figure 3-B
).
Figure 3-B – Detail View of Top Cabinet Hinge
9. Locate the bundle of loose cables in the inside
back of the cabinet. Route the cable bundle to
the front door and into the cable clamps on the
hinge side of the door (see Figure 4-B). Connect
the LCD power, VGA, and USB Touch
Controller cables to the back of the LCD.
10. Connect the free end of the credit card reader
cable (coming from the USB port on the
Computer Core) to the card reader.
11. Connect the free ends of the Audio cable, two-
wire power connector, and Rowelink cable to
the LED Controller Interconnect board.
12. Connect the free ends of the 15-pin cables from
the cabinet and door together.
13. Make sure all cables are dressed properly. Use
the cable clamps in the jukebox to keep cables
in place. Make sure nothing interferes with
opening and closing the door.
HINGE
PIN ON
CABINET
CABINET
DOOR
HINGE
BARREL
ON FRONT
DOOR
Figure 4-B – Inside View of NGX MINI 2 Jukebox with Front Door Opened