AMI MI982, User Manual

Page: 27 / 73

INSTALLATIONS
MI982 User’s Manual 23
J14: Front Panel Function Connector
ATX Power ON Switch: Pins 1 and 2
This 2-pin connector is an “ATX Power Supply On/Off Switch” on the
system that connects to the power switch on the case. When pressed, the
power switch will force the system to power on. When pressed again, it will
force the system to power off.
Hard Disk Drive LED Connector: Pins 3 and 4
This connector connects to the hard drive activity LED on control panel.
This LED will flash when the HDD is being accessed.
Pin # Signal Name
4 HDD Active
3 3.3V
Reset Switch: Pins 5 and 6
The reset switch allows the user to reset the system without turning the
main power switch off and then on again. Orientation is not required when
making a connection to this header.
Power LED: Pins 7 and 8
Pin # Signal Name
7 +5V
8 GND
7
8
1
2