AMI MB960 User Manual Download Page 52

Page: 52 / 65

DRIVER INSTALLATION

MB960 User’s Manual

VGA Drivers Installation

NOTE: Before installing the

Intel(R) Q67 Chipset Family Graphics

Driver,

the Microsoft .NET Framework 3.5 SPI should be installed.

To install the VGA drivers, follow the steps below.

1. Insert the CD that comes with the board. Click

Intel

and then

Intel(R)

QM67/Q67 Chipset Drivers

2. Click

Intel(R) Q67 Chipset Family Graphics Driver.

3. When the Welcome screen appears, click

Next

to continue.

4. Click

Yes

to to agree with the license agreement and continue the

installation.

5. On the Readme File Information screen, click

Next

to continue the

installation of the Intel® Graphics Media Accelerator Driver.

6. On Setup Progress screen, click

Next

to continue.

7. Setup complete. Click

Finish

to restart the computer and for changes

to take effect.

Summary of Contents for MB960


































































Search results

Summary of Contents for MB960

Reviews:

Related manuals for MB960

Brands by name

Popular brands

AMI MB960, User Manual

Search results

Summary of Contents for MB960

Reviews:

Related manuals for MB960

Brands by name

Popular brands