3
Getting started
3.1 Installing the SIM Cards and the Battery
An SIM card carries useful information, including your mobile phone number,
PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2
(PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network
information, contacts data, and short messages data.
Note:
After powering off your mobile phone, wait for a few seconds before removing or
inserting an SIM card.
Exercise caution when operating an SIM card, as friction or bending will damage
the SIM card.
Properly keep the mobile phone and its fittings such as the SIM cards beyond
children's reach.
Installation
Hold the End key for a while to power off the mobile phone
Push the back cover above the battery and remove it.
Pull the left battery buckle outward and then lift the battery away.
Insert the SIM card into the SIM card slot lightly with the corner cutting of the
card aligning to the notch of the slot and the gold plate of the card facing
download, till the SIM card cannot be further pushed in.
Aim the positive pole and negative pole of the battery at the battery connector
of the mobile phone, and press the left of the battery to install the battery into
the battery tank.
Using code
The mobile phone and the SIM cards support sorts of passwords, in order to
prevent the phone and the SIM cards from being misused. When you are prompted to
input any of the codes mentioned below, just input the correct code and then press the
OK key. If you input a wrong code, press the Right soft key to clear it and then input
