20
2.2 Fix the anchor bolts.
Drilling the hole for the anchor bolt with the rotary hammer drill, type the anchor
bolt into the ground, and then fasten it with ratchet spanner
(See Fig. 27).
Note: The tightening torque for the anchor bolt is 150N.m. Tap anchor
bolts into the ground at least 90mm deep
。
G. Install oil hose cover for lift on surface installation.
1. Tidy up the oil hose and air line, cover the oil hose cover
(See Fig. 28).
Drilling
Clearing
Bolting
Tighten
116/117
Fig.
27
Anchor bolts for the model
：
Use
19 driller to drill hole
Anchor bolts for the control cabinet
：
Use
10 driller to drill hole
Fig. 28
90
m
m
P1
P2
118
119
119
119
120
118
Use wood screw and Colloidal
screw to fix the tubing plate
Summary of Contents for DX-12A
