Troubleshooting
Symptom:
Correction:
Symptom:
Correction:
No display when the Power button is pressed.
If the batteries have run down, replace them with
new alkaline batteries. If the batteries are not in the correct
position, re-insert them with the correct polarities.
mark shown on display or the blood pressure value
is displayed excessively low (high).
Wrap the cuff properly so that it is positioned
correctly. If you talked or moved during the measurement, measure
it again quietly. If the wrist was shaken during the measurement,
repeat measurement.
Note: If the unit does not work, please call our consumer
information line at 1-800-363-2381. Under no circumstance
should you disassemble the unit and attempt repairs.
EE
11
Cautionary Notes
1. Avoid extreme temperatures, humidity, and direct sunlight.
Avoid strongly shocking the main unit, and protect it from dust.
2. Clean the blood pressure monitor body and the cuff carefully
with a slightly damp, soft cloth. Do not press. Do not wash the
cuff or use chemical cleaner.
3. Do not press the Start key when the cuff is not on the wrist.
4. Remove the batteries when the unit is not used for a long time.
5. The unit should not be operated by children.
6. This device might not be suitable for use by people with poor
blood circulation, common arrhythmias, such as atrial or
ventricular premature beats or atrial fibrillation. It is not
designed for ambulatory use.
