AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 4 of 8
AMG5516 Instruction Sheet D20739-
01.doc
Connections
Optical Connections Singlemode
No. of Optical Connections ..................1
Optical Fibre ........................................Singlemode
Connector ............................................SC/PC
Primary Optical Launch Power ............-10dBm
Transmit Wavelength...........................1550nm
Primary Optical Sensitivity...................-30dBm
Receive Wavelength............................1310nm
Minimum Optical Dynamic Range .......20dB.
Power Connection
Connector Type ...................................Removable 2-pin, 3.81mm, Screw Terminal
Connector Partno.................................Phoenix 1803578
Supply Voltage.....................................+12 to +15 Volts DC
Maximum Power ..................................2.5 Watts
Data and Alarm Channel Connections
No. of Data Channels ..........................1
No. of Alarms .......................................2
Connectors ..........................................Removable 8-pin, 2.5mm, Spring Terminal
Connector Partno.................................Phoenix 1881383
Data Interface ......................................RS-232, RS-422 or R-S485. Selected by slide switch inside
enclosure. *See appropriate section on how to remove the case
for access to the data switch.
RS-485 – Switch Position - Top
RS-422 – Switch Position - Middle
RS-232 – Switch Position - Bottom
Alarm Outputs Channels 1-2
Each alarm output uses a Solid-state relay, with a maximum load current of 150mA at 125Vac/dc and
Ron < 6.5Ω.
