background image

ELECTRIC RETRACTORS

Page 

of 

1

2

ELECTRIC RETRACTORS

Dear Purchaser:

Thank you for purchasing an AMF-Bruns of America product. Your product has been 
designed to provide years of safe and dependable service

 --

 as long as it is installed, used 

and maintained in accordance with the instructions provided in this manual.

All persons who will use and/or maintain this product must read, understand and follow all 
warnings and instructions provided in this manual. This manual should be considered an 
integral part of your product and should remain with your product

However, nothing in 

this manual, and none of the safety devices installed on the product, substitute for proper 
training, careful operation and common sense. 

Always be sure that your product is in optimum working order. If you suspect that 
anything is not working properly, or that a dangerous situation may exist, immediately 
contact

 

your dealer or AMF-Bruns of America before you proceed.

Keep th

is 

User's Guide

 

in 

a s

afe place for future reference over the lifetime of the

 

product. 

If

 

you

 

sell

 

the Electric Retractors

pass

 th

is 

User's Guide

 

to the new owner. 

All details, figures and dimension

s

 contained in th

is 

User's Guide

 

are

 

non-binding. 

No 

claims in any form can be derived from th

is manual. 

This

 

document

 

must not

 

be

 

reproduced

 

or

 

duplicated,

 

i

n full 

or

 

in

 

part,

 

without

 

the

 

prior,

 

written permission

 

of

 

the 

manufacturer.

The  Electric  Retractors

 

must

  not  be  converted  or  modified  in  any  way  without  s

eeking

 

the  prior  written  permission  from  AMF-Bruns.  AMF-Bruns  will  not  be  held  responsible  in 
any way if conversions or modifications are carried out without proper authorization.

 

Use

 

only

 

original

 

spare

 

parts

 

or

 

spare

 

parts

 

which

 

have been approved of by 

AMF-Bruns. 

If spare parts other than these are used, this can have a negative effect on the specified

 

characteristics, the functionality and safety of 

Electric Retractors

. The use of any other 

parts will render the warranty null and void. 

Use caution when removing OEM vehicle parts 

due to sharp edges.

 Depending on vehicle type, the installation process may vary.

For any concerns regarding the proper use, 

installation, 

maintenance or safety of your 

product, or if

 

you need to order new products, spare parts or accessories:

• Call your authorized AMF-Bruns of America dealer.

• Contact our 

AMF-Bruns 

Customer Service at 1-877-506-3770

• Email: [email protected]

• Visit our website: www.amfbrunsamerica.com

Sincerely,

AMF-Bruns of America

Summary of Contents for Electric Retractor













Reviews: