ELECTRIC RETRACTORS
Page 11 of 12
ELECTRIC RETRACTORS
•
Always keep tie-downs and belts clean and off the floor by using
AMF-Bruns
storage
pouch.
Part #: 10019363
. One storage device per wheelchair location is recommended
.
•
All systems and components should be regularly inspected, cleaned and maintained.
-- Clean webbing periodically with mild soap and water. After cleaning, fully extend
the
webbing (and position them to prevent water from entering retractors) until
completely dry.
-- Occasionally lubricate occupant buckles at the hinges, being careful not to
contamina
t
e the webbing.
•
Prevent contamination of webbing from contact with oil, gases, polishes and
chemicals, in particular, battery acid
, etc
.
•
Frayed, contaminated or damaged webbing should be
reported and
replaced.
•
Broken and worn components should be re
ported and re
placed.
•
Replace any systems or components (including floor and wall anchorages) that were
used during a vehicle collision
The AMF-Bruns of America customer service department will be more than pleased
to assist in ordering spare parts, maintenance and repair work, and provide
assistance with general problems or inquiries.
Reach Us At:
• 1797 Georgetown Road, Hudson, OH 44236
• Email: [email protected]
• Phone: 877-506-3770 or 234-284-2073
• Website: www.amfbrunsamerica. com
• Business Hours:
Monday-Friday: 7-30 am - 4:30 p.m.
|
Saturday - Sunday: Closed
NOTE
• Warranty work for the Electric Retractors must only be performed with the prior agreement
of AMF-Bruns of America. The costs of such work will not be accepted by AMF-Bruns
without prior agreement.
• This information is not all inclusive and may not cover or represent every installation.
For additional information, refer to our website or call AMF-Bruns.
