Amewi 22573, Manual

Page: 18 / 24

BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL HYDRAULIK LADERAUPE / HYDRAULIC TRACK LOADER
18
Switch on the remote-control. Press the icon to go to the setting menu. Press RX BIND, the remote-control displays "Binding
to RX...". This means that the remote control is waiting for the receiver signal.
Connect the binding cable to the BIND/VCC interface of the receiver and switch on the electronics.
After the connection is made, the remote control will display "RX BIND successful!" and exits the bind function.
Disconnect the binding cable from the receiver.
Check that all the controls are working. If this is not the case, repeat the above steps for RX BIND again.
HYDRAULIKÖL EINFÜLLEN /
FILLING HYDRAULIC OIL
Schrauben Sie den Deckel des Öltanks ab.
Füllen Sie ca. 80ml #32 - #46 Hydrauliköl ein.
Unscrew the cap of the oil tank.
Fill with approx. 80ml #32 bis #46 hydraulic oil.
WARNUNG /
WARNING
Hydrauliköl darf nicht als Lebensmittel verwendet werden! Sollte es versehentlich in die Augen gelangen, spülen Sie die Augen
mit klarem Wasser aus und suchen Sie schnell einen Arzt auf!
Hydraulic oil must not be used as food! If it enters your eyes accidentally, please rinse eyes with clear water and seek medical
advice in time!