Ametek sorensen hpd series, Operation Manual

Page: 30 / 41

Section 3. Load Connection and Sensing
Local Sensing
Figure 3.2 Output Barrier Strip With Jumpers Installed
High Voltage Models Two wire jumpers are shipped unattached with 60 V
models. If your application requires precisely regulated output voltage at the rear
output terminals, install the jumpers by inserting the jumper wires into the jumper
terminals as shown. See
Figure 3.3 .
Wire
Jumper
Figure 3.3 Output Terminal Block With Jumpers Installed
18
Operating Manual for HPD Series Power Supply