Ametek sorensen hpd series, Operation Manual

Page: 14 / 41

P
M
S
D
O
V
OVP
OVP Shutdown (OVP)
(For units with APG installed.)
ADJ
MODE
VOLTAGE CURRENT
OVP Adjust Potentiometer (OVP ADJ)
(For units with APG installed.)
Voltage Mode
Indicator (Green LED)
Voltage Control Knob
(10-turn standard)
SENSE
POWER
AC Power Switch
Safety Ground
Binding Post (green or gray)
Positive (

) Output Binding Post (Red)
Return (

) Output Binding
Post (Black)
Section 1. Features and Specifications
Options and Accessories
Options and Accessories
• Internal Analog Programming (APG) interface for analog signal control of
voltage and current, overvoltage protection (OVP), master/slave output tracking,
and remote ON/OFF.
• Internal RS-232 interface for serial instrument programming using RS-232
protocol.
• Internal GPIB interface for complete remote digital programming. IEEE-488
standard.
• Optional 200–250 Vac input (Option AC200). Standard is 115 Vac. Optional AC
input cords for use in different countries.
• Ten-turn current potentiometer (Option M11). Rack mount kit (Option RM).
• Locking voltage and/or current adjust knobs (Option M13A).
Front Panel Controls
Figure 1.1 shows the controls, LEDs, and meters located on the unit’s front panel.
Figure 1.1 Front Panel Controls
2
Operating Manual for HPD Series Power Supply
(For units with APG installed.
(Volts, Amperes)
(For units with APG installed.)
Analog Bar Graph Display
Current Limit Mode
Indicator (Red LED)
Current Limit Adjust Knob
(1-turn standard)
Positive (

) Sense
Connection
(Banana Jack)
Return (

) Sense
Connection
(Banana Jack)