Ametek Sorensen Asterion DC ASM, Programming Manual

Page: 29 / 162

Asterion DC Multioutput Series
Programming Manual
4-12
M330517-01 Rev C
Parity None Not Selectable
Incoming
Termination
Character
•
CR (Carriage Return): HEX, 0x0d (DEC, 13),
•
LF (Line Feed): HEX, 0x0a (DEC, 10),
•
CR LF (Carriage Return and Line Feed):
HEX, 0x0d 0x0a (DEC, 13 10)
•
LF CR (Line Feed and Carriage Return):
HEX, 0x0a 0x0d (DEC, 10 13)
Not Selectable
Outgoing
Termination
Character(s)
CR LF (Carriage Return and Line Feed):
HEX, 0x0d 0x0a (DEC, 13 10)
Not Selectable
Table 4-3: Configuration requirements for RS232
1. Build an RS232 communications cable as per the pinout description illustrated in
Figure 4-3 and Table 4-4 (with crossover of signals Rx/Tx and CTS/RTS):
D-Subminiature 9-Pin
Connector
Male Connector
(Power supply
Interface)
D-Subminiature 9-Pin
Connector
Female Socket (PC
interface)
2(RxD) 3(TxD)
3(TxD) 2(RxD)
No Connection No Connection
5(GND) 5(GND)
7(RTS) 8(CTS)
8(CTS) 7(RTS)
Table 4-4: RS-232C Interface Connector Pinout
TxD-Transmit
RxD-Receive
RTS-Request to Send
CTS-Clear to Send
Figure 4-3: RS232 Communications Cable Pinout