M330517-01 Rev C
3-8
3
LOCAL/REMOTE SELECTION
Introduction
This section describes the operation of Local or Remote modes available in the front
panel. Remote mode allows the power supply operation to be controlled only through
digital communication interfaces. Whereas Local mode allows the power supply
operations controlled through front panel.
Remote mode
•
Unit can be set to Remote mode by sending the command
SYST:LOCAL 0
using
any of the interface available on the unit (RS232,USB,LAN,GPIB).
NOTE
: Unit can also be set to remote by sending SCPI write command using any of the
interface available on the unit. (Refer to Figure 3-1)
Figure 3-1: Local/Remote Screen
•
Upon pressing the Lock symbol or by sending the command
SYST:LOCAL 1
,
Asterion DC Multioutput Series power supply front panel screen will navigate to
Home Screen menu. (Refer to Figure 3-2)
Figure 3-2: Home Screen
Summary of Contents for Sorensen Asterion DC ASM
Page 1: ...M330517 01 Rev C Asterion DC Multioutput Series Programming Manual...
Page 6: ...Asterion DC Multioutput Series Programming Manual M330517 01 Rev C v SAFETY SYMBOLS...
Page 145: ...Asterion DC Multioutput Series Programming Manual 13 128 M330517 01 Rev C CAL n LOCK...
Page 162: ...M330461 01 Rev C 14 145...
