M330517-01 Rev C
1-1
1
OVERVIEW
Introduction
This manual provides instructions for remote programming control and monitoring for
Asterion DC Multioutput Series power supplies. For easy navigation to the applicable
instructions, this manual separates RS232, USB, IEEE 488.2 GPIB and Ethernet
setup instructions. The instructions then converge where they are common to all three
interface options. The Asterion DC Multioutput Series power supplies provides default
interface of RS232, USB and Ethernet. IEEE 488.2 GPIB is an optional interface. Use
this programming manual in conjunction with your Asterion DC Multioutput Series
power supplies operational manual.
RS232 Interface
If you are using the RS232 interface, go to:
•
2 for Features, Functions and Specifications
•
3 for Local/Remote Selection
•
4 for RS232 Configurations and Remote Programming
•
8 for Remote Analog Programming
•
9 External User Control Interface Connectors
•
10 for SCPI Commands and Definitions
•
11 Output ON/OFF Delay
•
12 Sequence Function
•
13 for Calibration Procedures
•
14 for SCPI Status Implementation
USB Interface
If you are using the USB interface, go to:
•
2 for Features, Functions and Specifications
•
3 for Local/Remote Selection
•
5 for USB Configurations and Remote Programming
Summary of Contents for Sorensen Asterion DC ASM
Page 1: ...M330517 01 Rev C Asterion DC Multioutput Series Programming Manual...
Page 6: ...Asterion DC Multioutput Series Programming Manual M330517 01 Rev C v SAFETY SYMBOLS...
Page 145: ...Asterion DC Multioutput Series Programming Manual 13 128 M330517 01 Rev C CAL n LOCK...
Page 162: ...M330461 01 Rev C 14 145...
