User Manual
3
TEMPERATURE MEASUREMENT OPTION
T = YES
LEAVE BLANK = NO
CABLE SEAL
V = VITON
N = NEOPRENE
FILL FLUID
S = SILICONE OIL (STANDARD)
DIAPHRAGM MATERIAL
L = 316L STAINLESS STEEL
ELECTRICAL CONNECTION OPTION
N = POLYURETHANE CABLE (K515136)/NUT
R = POLYURETHANE CABLE (K515136)/NUT/CABLE SUPPORT BRACKET
C = POLYURETHANE CABLE (K515136)/CONDUIT ADAPTER
E = POLYURETHANE CABLE (K515136)/EMI/NUT
F = POLYURETHANE CABLE (K515136)/EMI/CABLE SUPPORT BRACKET
G = POLYURETHANE CABLE (K515136)/EMI/CONDUIT ADAPTER
O = POLYOLEFIN CABLE (K515101)/NUT
Y = POLYOLEFIN CABLE (K515101)/NUT/CABLE SUPPORT BRACKET
W = POLYOLEFIN CABLE (K515101)/CONDUIT ADAPTER
T = TEFLON CABLE (K515075)/NUT
S = TEFLON CABLE (K515075)/NUT/CABLE SUPPORT BRACKET
V = TEFLON CABLE (K515075)/CONDUIT ADAPTER
X = TEFLON CABLE (K515075)/EMI/CONDUIT ADAPTER
PRESSURE CODE
XXXX = PRESSURE RANGE (PSI)
BXXX = PRESSURE RANGE (BAR)
INPUT/OUTPUT
B = 11-30 VDC / 4-20 MA
C = 9-30VDC / 1-6VDC
D = 9-30VDC / 1-5VDC
E = 9-30VDC / 0.5-4.5VDC
F = 9-30VDC / 0-5VDC
G = 5VDC / 0.8-3.2VDC (RATIOMETRIC FROM 4.75 TO 5.25VDC INPUT)
H = 5VDC / 1-6VDC (RATIOMETRIC FROM 4.75 TO 5.25VDC INPUT)
J = 9-30VDC / 0.25-2.75VDC
R = 5VDC / 1-6VDC (RATIOMETRIC FROM 4.75 TO 5.25VDC INPUT)
SENSING PORT
S = DELRIN SNUBNOSE
SDT - SUBMERSIBLE DIGITAL TRANSDUCER
SDT S B
0015
N L S V T
Model Number And Ordering Information
EXAMPLE: To specify the Model SDT Submersible Transmitter with 11-30V Input
and 4-20mA Output, having to measure 15psi (34.6 Ft water), with a standard nut
and polyurethane cable & electrical connection, 316 stainless steel diaphragm,
silicone oil fill, Viton grommet and 100 feet of cable: SDTSB0015NLSV (100ft cable)
NOTES:
1) Cable Termination side should be located in a dry termperature
stable environment.
2) Damage will result if submerged in frozen liquid.
3) A fused or crrent limited DC power source is recommended
to prevent damage during fault conditions.
4) Shield is tied to case on EMI versions only
5) Additional pressure ranges are available, consult factory.
Notes:
1) Cable Termination side should be located in a dry temperature stable environment.
2) Damage will result if submerged in frozen liquid.
3) A fused or current limited DC power source is recommended to prevent damage during fault conditions.
4) Shield is tied to case on EMI versions only
5) Additional pressure ranges are available, consult factory.
Example: To specify the Model SDT Submersible Transmitter with 11-30V Input and 4-20mA Output having to
measure 15psi (34.6 ft/water) with a standard nut and polyurethane cable & electrical connection, 316ss Dia-
phragm, silicon oil fi ll, Viton grommet and 100 ft of cable: SDTSB0015NLSV (100ft cable)
WIRE LEGEND
COLOR
TEFLON
COLOR POLY-
URETHANE/
POLYOLEFIN
VOLTAGE
OUTPUT
CURRENT
(R-20MA)
OUTPUT
RED
RED
+Vin
+Vin
BLACK
BLACK
–Vin
–Vin
WHITE
WHITE
Vout
N/A
GREEN
GREEN
CASE GROUND
BLUE
BLUE
TEMPERATURE
ORANGE
BROWN
STANDARD PRESSURE RANGES*
PSI
BAR
Reference Equivalents
0001
B0.2
0-2.31 ft water
0-0.7 m water
0006
B0.4
0-13.8 ft water
0-4.2 m water
0015
B001
0-34.6 ft water
0-10.5 m water
0030
B002
0-69.2 ft water
0-21.1 m water
0060
B004
0-138 ft water
0-42.2 m water
0100
B007
0-230 ft water
0-70.3 m water
0150
B010
0-345 ft water
0-105.4 m water
