Ametek ORTEC radEAGLET, User Manual

Page: 45 / 140

radEAGLET User Manual radEAGLET Advanced Operations
Current Dose Rate
Duration (Real, Live, Dead)
Maximum Peak Height
Current Count Rate
Vertical Scaling
Acquisition Status
Channel or Energy Axis
Count Axis
Figure 31: The spectrum screen
Analyze
Let the radEAGLET apply its identification algorithm to the current spectrum. The
result is shown on the screen (Fig. 32 , p. 45 ) until you press Analyze again.
Results (Confidence (1–10)
and Nuclide)
Identified Peaks
Figure 32: Result of a spectrum analysis
Cursor Right
Move a cursor into the spectrum diagram from lower to higher energies along the
horizontal axis.
The cursor is a vertical line (Fig. 33 , p. 46 ) labeled with the energy, the channel number,
and the number of counts at this position in the spectrum.
© innoRIID GmbH • 2018-10-24 Software 3.2.0 • Document 3.2.2o 45/140