Ametek Ortec radEAGLET-R 2SG, User Manual

Page: 60 / 163

5.8 Wi-Fi Settings radEAGLET-R User Manual
Settings and Commands
Exit
Return to the superior screen.
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Select
Select the highlighted item.
5.8 Wi-Fi Settings
This item is available while a Wi-Fi dongle is plugged into the radEAGLET-R ’s USB-A
port.
This screen groups settings and status information to connect your radEAGLET-R to other
devices via Wi-Fi (Fig. 48 , p. 60 ).
The Wi-Fi hardware can be used for either connecting to an existing network or es-
tablishing a hotspot network but not both at the same time.
Wi-Fi Status
Figure 48: The Wi-Fi settings
Settings and Commands
Wi-Fi
Switch the Wi-Fi dongle on or off.
If you radEAGLET-R finds a wireless network you connected to before (see below),
it will re-connect without asking for credentials.
60/163 Software 3.2.12r • Document 3.3.3b4o © innoRIID GmbH • 2020-11-18