Ametek mocon Dansensor MAP Mix ProVectus, User Manual

Page: 22 / 80

20 User Guide EN Dansensor
®
MAP Mix Provectus
P/N 300862-K
11/2019
Electrical connections

Connect the power supply cable

between a power outlet and the “POWER” connector.

(The power cable is delivered with the device).

Connect a 25-pole communication cable

from the “I/O CONTROL” connector to the
appropriate port on the packaging machine. This cable is delivered with the device.

See cable specifications in "I/O Cable" on page 21 .

Connect a 9-pole serial cable

from the “COM1” connector to the “COM2” connector on
the MAP Check 3 or a master mixer or to the appropriate port on the packaging machine -
see
"COM-1/COM-2 Cables" on page 23 for details. This cable is not delivered with the device.

Connect a 9-pole serial cable

from the “COM2” connector to the “COM1” connector on a
slave mixer (option) - see "COM-1/COM-2 Cables" on page 23 for details. This cable is not
delivered with the device.

Connect a LAN/Ethernet cable

from the LAN connector (labelled ) to a connector on
your local area network This cable is not delivered with the device.
NOTE! Use CAT6 cables for optimal noise immunity.



The USB connector (labelled ) can be used for connecting a USB Memory stick

for
exporting/importing log data, device settings etc.

On “Stand-Alone” versions you can use the USB connector on the device front as well.
86%
*%
."1.JY1SP7(BT