2
103887 01
1.
INTRODUCTION
The mAcal is a loop calibrator for measuring and generating mA. The
mAcal is specially designed for use in industrial plants with 4-20mA
signals. The mAcal can be operated with
one hand, and operation is simple
and intuitive.
1.1
PACKING LIST
When the instrument is received, the box should contain the following:
mAcal
Bag
2 test leads with crocodile clip
4 batteries, type LR6, AA
This user’s guide
2. SAFETY INSTRUCTIONS
Read this manual carefully before using the instrument!
In order to avoid any personal injuries and/or damage to the instrument
all safety instructions and warnings must be observed.
Disposal – WEEE Directive
These calibrators contain Electrical and Electronic circuits and must be
recycled or disposed of properly (in accordance with the WEEE
Directive 2002/96/EC).
WARNING:
The calibrator
must not
be used for any purposes other than those
described in this manual.
Follow all equipment safety procedures.
The calibrator has been designed for
interior use only
and should
not be used in hazardous areas
, where vapour or gas leaks, etc.
may constitute a danger of explosion.
Do not
apply more than the rated voltage. See specifications for
supported ranges.
