1
1.0 Introduction
The IPI Mk. II combines the high accuracy of digital electronics with the
convenience and ease of use of an analog test gauge. Accurate to ± 0.05%
FS, the IPI Mk. II can be used as a calibration reference, or in any
application where high accuracy pressure measurement is required.
Many user configurable functions have been designed into the IPI Mk. II
including sampling rate, TARE, damping, auto shut off, and min-max. Once
the gauge is configured, settings can be locked and password protected to
prevent unauthorized changes to configuration.
Optional data logging software.
IPILOG Software extends the functions of the JOFRA IPI Mk.II.
The Software lets you:
• Set up data logging configuration in IPI Mk.II
• Upload logged data from IPI Mk.II, including export of run data to text,
comma separated values (CSV), and Excel files
• Clear logged data in IPI Mk.II
1.1 Contacting Ametek
Sales & Service Offices:
AMETEK MCT (North America)
Tel: +1 (727) 536 7831 • [email protected]
AMETEK Singapore Pte. Ltd. (Singapore)
Tel: +65 6 484 2388 • [email protected]
AMETEK Inc. Beijing Rep. Office (China)
Tel: +86 10 8526 2111 • [email protected]
AMETEK GmbH (Germany)
Tel: +49 2159 9136 510 • [email protected]
AMETEK Lloyd Instruments (UK)
Tel: +44 (0)1243 833 370 • [email protected]
1.2 Standard Equipment
Check to see that your IPI Mk. II has arrived intact. Batteries are factory
installed. Save the packing materials at least until you have verified that
there is no concealed damage.
1.3 Safety information
A Warning identifies conditions and actions that pose hazard(s) to the user;
a Caution identifies conditions and actions that may damage the Calibrator
or the equipment under test.
