Ametek Drexelbrook Universal IV CM, Installation And Operating Instructions Manual

Page: 59 / 128

Universal IV™ CM Density Compensated Model
52
Code Display Message Description Actions
ERROR 01 CALCULATION K EFF EXCEEDS
K H2O ERROR
Calculated effective dielectric
constant exceeds water dielectric
constant
1. Cycle power.
2. Hardware Failure - Contact
factory
ERROR 02 CALCULATION EFF CAP
RANGE ERROR Calculated effective capacitance
is outside of expected limits
1. Calibrate DCM
2. Verify U-IV CM is operating
correctly. Reference U-IV CM
manual
3.Contact factory
ERROR 03 CALCULATION AIR CAP RANGE
ERROR
Calculated air capacitance is
outside of expected limits 1. Verify U-IV CM & Coriolis are
operating correctly.
2. Verify Cut Monitor is for the
correct pipe size.
3.Contact factory
ERROR 04 CALCULATION EFF DENSITY
RANGE ERROR Calculated effective (mixture)
density is outside of expected
limits
1. Verify U-IV CM & Coriolis are
operating correctly
2.Contact factory
ERROR 05 CALCULATION H2O DENSITY
RANGE ERROR Calculated water density is
outside of expected limits 1. Verify U-IV CM & Coriolis are
operating correctly
2.Contact factory
ERROR 06 CALCULATION OIL DENSITY
RANGE ERROR Calculated oil density is outside of
expected limits 1. Verify U-IV CM & Coriolis are
operating correctly
2.Contact factory
ERROR 07 CALCULATION TEMPERATURE
RANGE ERROR Calculated temperature is outside
of expected limits 1. Verify U-IV CM & Coriolis are
operating correctly
2.Contact factory
ERROR 08 CALCULATION K EFF RANGE
ERROR
Calculated effective dielectric
constant is outside of expected
limits
1. Verify U-IV CM & Coriolis are
operating correctly
2.Contact factory
ERROR 09 CALCULATION K EFF RANGE
ERROR
Calculated water dielectric
constant is outside of expected
limits 1. Verify U-IV CM & Coriolis are
operating correctly
2.Contact factory
ERRPR 10 CALCULATION FLOWRATE
THRESHOLD ERROR Flow rate has dropped below
threshold. Density value is locked
on last density before threshold
drop
1. If system is not running, no
action required
2. Verify Coriolis operating
properly
3. Consult factory
ERROR 11 FIELD FLASH CKSM ERROR Field flash checksum failure Lost
customer configuration Reconfigure DCM
ERROR 12 IM INTERMITTENT COMM LOSS
ERROR
Inter microprocessor intermittent
loss of communication No Action required
5.3 Error Codes (Continued)
Table 5.2