Ametek Drexelbrook Universal IV CM, Installation And Operating Instructions Manual

Page: 53 / 128

Universal IV™ CM Density Compensated Model
46
Section 4: Specifications
4.1 Transmitter Specifications
Technology
RF Admittance / Capacitance
Supply Voltage
19-30VDC, 4-wire external powered
Ouput/Digital Protocol
4-20mA, HART
Compatible with HART
®
Accuracy and Resolution
Water Cut Nominal Water Cut Water Cut
Range Variance*
Resolution**
0 to 1% +/- 0.03 0.0002
0 to 5% +/- 0.04 0.0009
* The measurement accuracy of an inline, dynamic water cut
measurement is dependent upon many process variables including:
oil dielectric consistency, fluid velocity at the sample point, mounting
geometry and homogeneity of the oil/water emulsion. The values
above represent nominal water cut measurement variances for
a properly installed sensor under consistent measurement point
conditions.
** The smallest water cut step that the instrument can resolve
Load Resistance
Maximum 550 ohms at 30 VDC
Minimum 250 ohms for HART protocol
Ambient Temperature
-40°C to 75°C (-40°F to 167°F)
Process Temperature
Up 232°C (450°F) Transmitter will compensate for the
effects of temperature when the water is in liquid state
(eg. 32°F to 212°F (-0°C to 100°C at ambient pressure)
Process Pressure
Up 103 bar (1,500 psi), probe dependent
Density
Transmitter will compensate for the effects of changing
density in the process flow
Response Time
350 msec nominal (no damping applied)
1-90 seconds programmable damping time
Supply Voltage Effect
0.2% of full scale max
Start-Up Time
< 12 seconds
Configuration and Calibration
Standard LCD display and keypad are built-in
STExplorer PC-based software (free download)
Emission and Surge Protection
Compliant with IEC6100-4.2, 3, 4, 6, 8
Compliant with CISPR11 Group I, Class B
Enclosure Rating
Meets Environmental Protection to NEMA 4X & IP66
Approvals
Intrinsically Safe (IS)
Explosion Proof (XP) without IS barrier
FM, FMc, ATEX, IECEx
CE Mark