AMETEK CTS
CDN 117A series
Operation Manual
V 1.00
24 / 30
8.
Appendix
8.1.
Declaration of conformity
Manufacturer:
AMETEK CTS GmbH
Address:
Sternenhofstr. 15
4153 Reinach
Switzerland
Declares
, that under is sole responsibility, the product’s listed below, including all their options, are conformity with
the applicable CE directives listed below using the relevant section of the following EC standards and other
normative documents.
Product‘s name:
CDN 117A series coupling decoupling network for surge & Ringw wave pulses
Model Number(s)
NSG 117A C4-4-1,
NSG 117A C6-4-1
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use
(Requirements for devices to use in industrial area).
EN 61000-3-2:2014
Limits for harmonic current emissions, (not applicable).
EN 61000-3-3:2013
Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems, (not applicable).
The purpose of this instrument is to couple defined interferences signals (surge impulses) for EMI immunity
testing. The device includes only passive components like resistors, capatitances and inductors. Depending on
the arrangement of the test rig, the configuration, the cabling and the properties of the EUT itself, a significant
amount of electromagnetic radiation may result that could also affect other equipment and systems. The user
himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of doubt,
the tests should be carried out in a Faraday cage.
Manufacturer
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach
Tel:
+41 61-7179191
Fax:
+41 61-7179199
By
A. Burger
Director Engineering AMETEK CTS
Place
Reinach BL, Switzerland
Date
2. April 2019