manualshive.com logo in svg

Ametek AN-3100D, Installation And Configuration Manual, Page: 37 / 137

Share
Download
Ametek AN-3100D Installation And Configuration Manual Download Page 37

19” Rack Mounting (option RK) 

The dimensions given in the tables below refer to the height of the 19” Rack 
based on the number of Cells High. In all configurations, the Annunciator will be 
5 cells wide to maintain the 19” rack width. Dimensions shown are in inches 
(mm) 

# of Cells High 

Overall Rack Height 

 Inches 

mm 

U 

Rack 

1 5.25 

133.35 

3U 

2 8.75 

222.25 

5U 

3 12.25 

311.15 

7U 

4 15.75 

400.05 

9U 

5 19.25 

488.95 

11U 

6 22 

75 

577.85 

13U 

7 26.25 

666.75 

15U 

8 29.75 

755.65 

17U 

9 33.25 

844.55 

19U 

10 36.75 

933.45 

21U 

11 40.25 

1022.35 

23U 

12 43.75 

1111.25 

25U 

13 47.25 

1200.15 

27U 

 

Annunciator Depth 

Inches 

mm 

Maximum depth 

6.8 

172.72 

 

For system installation, perform the following steps: 

Allow a minimum of 6 inches (150 mm) above the unit and behind the panel for 
proper ventilation. 

1  Slide the annunciator assembly into the rack (from the front of the rack). 
2  Secure using the recommended fixing screws into the rack mount rails.  

AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL

i. 25 

Summary of Contents for AN-3100D










































































































































Reviews:

No comments