8
With proper installation, basic operation is straightforward:
1.) Set the bandswitch to the desired band. This happens automatically in the REM
position with a suitable radio interface cable.
2.) Set the exciter or transceiver to the desired power below 100 watts.
3.) Place the standby switch in the operate position.
4.) Transmit, and watching Forward Power metering, be sure power does not
exceed 1200 watts on peaks.
5.) For high duty cycle modes and long transmissions, reduce the power. The
amplifier will shut down if the FETs reach the maximum safe temperature limits.
Summary of Contents for ALS-1406/S
Page 27: ......
