Maintenance of the Indoor Unit
1. Clean the outer surface of the unit with a dry or damp cloth.
2. If there is residue, the unit may be cleaned with a mild detergent solution. Do not use chemical
solvents or flammable liquids to clean the surface of the unit. Wipe dry after cleaning with a
soft dry cloth.
3. Clean the filter a minimum of every three months. Clean more often if it is in an area that is
dusty or smoky.
4. Open the front outer panel of the indoor unit.
5. Remove the filter by grasping the edges and pulling downward.
6. Clean the filter using a vacuum or rinse under cool, clear water.
7. If the filter is very dirty, use warm water (below 115° F/ 45°C). A mild detergent should only
be used if the residue cannot be removed with warm water. Rinse the filter thoroughly
before allowing to air dry. If the filter cannot be adequately cleaned, contact your dealer for a
replacement filter.
8. Let the filter air dry to avoid warping. Do not dry the filter in direct sunlight.
9. Reinstall the filter into the clips and close the front panel.
WARNING
1. After removing the filter, do not touch the evaporator fins to avoid injury.
2. Do not use fire, a hair dryer or any other source of heat to dry the filter to avoid a fire
hazard and warping.
34
115V Mini-Split
